A worked example
Say someone worked 40 hours in a week, and 8 of those hours went on internal meetings and admin. 40 minus 8 is 32 billable hours. 32 divided by 40 is 80%, so 80% of the week was billable and 20% was not.
If the target is 85%, the week needed 34 billable hours (40 times 0.85). The person billed 32, so they were 2 hours short.
To value the hours, multiply by your rate: the 32 billable hours are worth 32 times your hourly rate, and the 8 hours not billed are worth 8 times it.
Two sums to do by hand, because this page does not ask for them. First, the rate you really earn: your rate times 32 billable hours, divided by all 40 hours worked, is 80% of your rate. A rate that looks right per billable hour is 20% lower per hour worked. Second, the rate you need: to earn a target per hour worked while billing only 80% of the time, divide the target by 0.8, which is 1.25 times the target.
Entering time in blocks changes the total too. If you log 20 minutes, 50 minutes and 35 minutes for one client, that is 105 minutes, or 1.75 hours. Round each entry up to the next 6 minutes (a tenth of an hour) and you bill 0.4 + 0.9 + 0.6 = 1.9 hours. Rounding each entry up to the next quarter hour gives 0.5 + 1 + 0.75 = 2.25 hours. The same work, three different totals, which is why the increment belongs in the agreement with the client.
How it's calculated
- Billable hours
hours worked − hours not billable- Billable share
billable hours ÷ hours worked × 100- Value at your rate
billable hours × your rate (and hours not billable × your rate for the unbilled value)- Hours a target needs
hours worked × target ÷ 100- Short of target by
hours a target needs − billable hours, never below 0
The share divides by hours worked. Utilisation usually divides by the hours someone was available after leave and public holidays, so the two can differ. The utilisation calculator shows both.
Questions
What counts as billable time?
Time you invoice a client for, or time covered by a retainer or fixed fee you have agreed to charge for. Whether internal work, pitching or unsold overruns count is your decision. Use the same rule every time so the percentage means the same thing from one period to the next.
Is billable percentage the same as utilisation?
Not quite. This calculator divides billable hours by all hours worked. Utilisation is usually billable hours divided by the hours someone was available, after leave and public holidays, so it depends on a capacity figure this page does not ask for. Use the utilisation calculator when you want that.
Does it round?
Hours are shown to two decimal places and percentages to one. Nothing is rounded to the quarter hour. If you bill in increments, round each time entry before you add the entries up, then type the total in.
How do I turn minutes into tenths of an hour?
Divide the minutes by 60. Six minutes is 0.1 hour, 30 minutes is 0.5 and 45 minutes is 0.75. Billing in tenths means every entry is a multiple of 6 minutes, so a 20-minute task is billed as 0.4 hour (24 minutes) if you round up. Whether you round up or to the nearest increment, and the size of the increment, is something to agree with the client, not a rule of arithmetic.
How many billable hours do I need to reach a revenue target?
Divide the target by your rate. A target of 160,000 at a rate of 100 an hour needs 1,600 billable hours. Divide by the weeks you work and the hours a week, after leave and public holidays, to see the billable share it implies. If that share is above what your team has billed in past periods, the target needs a higher rate, more people or fewer non-billable hours.
What is the difference between my rate per billable hour and what I earn per hour worked?
The rate is what you charge for an hour you bill. What you earn per hour worked is lower whenever some hours are not billed: revenue divided by all hours worked. At 80% billable you earn 80% of your rate for each hour worked. Pricing from the rate alone ignores the unbilled hours.
Does anything I type leave my browser?
No. The sums run in your browser, and the page does not save what you type.
Related
- Agency utilisation calculator: billable share against available hours
- Timesheet calculator: add up start and finish times
- Agency timesheet template: hours by client with billable totals
- Guide: billable and non-billable time
- Markup calculator
- Retainer hours calculator
Last reviewed 30 October 2026. These calculators do arithmetic on the numbers you type; they are not financial, tax or legal advice. More free tools.